B2 Audio HNC6.1
Lækkert komponentsæt med markant og harmonisk lyd. Skal opleves.
Enter the era of perfection, performance & prestige.
Handpicked and matched branded crossover components were chosen for the HNC6.1 crossovers.
The results are optimized audio reproduction, increased accuracy of the 3.5 KHz /12 dB crossover point used for the 1.5″ silk dome tweeters with angular direction.
The midwoofers were derived from the Reference series, using only premium parts such as nomex spiders and lightweight butylene surrounds for longetivity and efficiency while the coated paper cone was chosen for its superior SQ performance.
If it is not a reference it is as close as it gets.
|Midrange (HNC6.1 W)||Tweeter (HNC6.1 T)|
|Frequency Response:||60 Hz ~ 6 KHz||1.5 KHz ~ 20 KHz|
|Sensitivity:||90.3 dB||90 dB|
|Nominal Impedance:||4 Ohm||4 Ohm|
|DC Resistance (Re):||3.6 Ohm||3.6 Ohm|
|Resonanse Frequency (Fs):||57.9 Hz||1.3 KHz|
|Voice Coil diameter:||1″||1″|
|Power Handling:||100 w||10 w|
*It is essential that our speakers are given time to allow the suspension to soften up. Depending on use, this may take several weeks. While this process is undergoing, it is not recommended to apply full amplification power according to the speakers specs. Once the moving parts have been broken in, the performance of your speaker will increase.